Magnolia Vinyl offers printed patterns on Oracal permanent adhesive and Siser heat transfer vinyl. Our designs have been created by combining graphic/font elements and artwork with original design work. You may use any design for your personal or commercial use.
The Transfer Mask is available separately. You will need it to transfer your vinyl to your substrate when using HTV. This mask is reusable for up to 5 times, depending upon the use.
A seperate transfer tape is available for Adhesive products.
Heat Transfer Application Instructions (home iron)
• Cut material – don’t mirror! • Weed excess material • Mask with TTD High Tack Mask/Carrier Sheet • Set iron dial between Cotton and Linen • Cover design with Kraft paper or non-stick cover sheet • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 15 seconds • If areas of design lift after application, replace cover sheet and re-press for 10 seconds • Peel carrier hot or cold
Heat Transfer Application Instructions (heat press)
• Cut material – don’t mirror! • Weed excess material • Mask with TTD Mask Tack Mask/Carrier Sheet • Preheat garment for 2-3 seconds • Apply design at 305°F/150°C • Use medium pressure for 10-15 seconds • Peel carrier hot or cold